The adjustable steel support has the characteristics of retractable, arbitrary combination, simple operation, high strength, good pouring effect, construction safety, etc., which not only improves the construction quality, but also reduces the cost of the construction project as a whole and successfully solves the mold run caused by the traditional process. The problem of mold has greatly improved the work efficiency of construction projects and brought great economic and social benefits to construction enterprises.
Steel support, also known as steel support, steel support for construction: Adjustable steel support is an important part of the “independent” formwork support system. There are three types of steel support produced by our company: conventional type (I), conventional weighted type (II) ), heavy (Type III). Users can choose according to the load needs of the construction project.
I-type pillar: upper tube Ø48X2.5mm, lower tube Ø60X2.5mm
Type II steel strut (conventional weight): upper tube Ø48X3.2mm, lower tube Ø60X3mm
Heavy Steel Prop (Type III): Upper Tube Ø60X3.2mm, Lower Tube Ø75X3.2mm
How to use the adjustable building screw:
1. Insert the pin into the joint hole between the inner tubes.
2. Use the handle to turn the adjusting nut to the appropriate height.
3. The adjustable steel support should be installed vertically to avoid eccentric load as much as possible.