1. Grinding of thick-walled seamless nozzle: After cutting, use an angle grinder to grind the plastic layer of the nozzle. Its purpose is to prevent the plastic layer from melting or even burning during the flange welding process, damaging the pipe, and grinding the nozzle plastic layer with an angle grinder. 2. Thick-walled seamless pipe plastic coating treatment:After polishing,…
Read MoreInward folding is a common quality problem in the production of seamless steel pipes. It is the irregularly distributed sheet-like folds and spiral-like folds on the inner surface of the steel pipe, and the edges of the defects are mostly serrated. There are two main reasons for the internal folding defects: the quality of the continuous casting tube blank…
Read MoreThe problem of uneven wall thickness of large-diameter seamless steel pipes is relatively common in the production of seamless steel pipes, and it is also a headache for customers. The unevenness of the thick-walled seamless steel pipe is mainly reflected in the uneven spiral wall, the uneven linear wall thickness, and the thickness of the head and tail is…
Read MoreThe order project to be introduced today the project is used in Bangladesh, which is the first cooperation between Xinyue and customers. The products mainly include seamless steel pipes, pipe fittings and thermal insulation layer. Material：ASTM A106 Specification:273mm*9.27mm*6m Usage:hot water and heating supply system project Timeline: Received the inquire on Nov,2021 Signed the contract on Nov,2021 Delivery time…
Read MoreInternal thread is a defect that often occurs in skew rolling mills, and the form is full-length and local. The internal thread defect is the trace left by the deformation of the seamless steel pipe every half-turn. When using fixed mandrels and semi-floating mandrels, sometimes internal thread defects are caused by mandrel wear. The internal thread defects of the…
Read MoreWelded steel tube weld pores not only affect the tightness of the pipeline weld and cause pipeline leakage, but also become the induction point of corrosion, which seriously reduces the strength and toughness of the weld. The factors that cause porosity in the weld are: moisture, dirt, oxide scale and iron filings in the flux, welding components and covering…
Read MoreNowadays, the surface of the welded tubes we use are required to be coated for corrosion protection. The common anticorrosion coatings for welded tubes are petroleum asphalt, epoxy coal tar asphalt, PE sheath and PE foam sheath, epoxy powder, coal tar enamel and three-layer composite structure. The more used pipe anti-corrosion methods are 3PE composite structure and single-layer powder…
Read MoreMost of the structural seamless steel pipes work under relatively large dynamic loads. They are subjected to tension, compression, bending, torsion or shearing. Some surfaces also have friction, requiring certain wear resistance and so on. In summary, parts operate under various compound stresses. Structural seamless steel pipes are mainly structural parts of various machines and mechanisms, such as shafts,…
Read MoreXINYUE STEEL GROUP set up several production bases in Tianjin & Hebei Province, manufacturing ERW Steel Pipe, SSAW Steel Pipe, LSAW Steel Pipe, Seamless Steel Pipe, Scaffolding system and couplers, RHS, SHS, etc.
