Seamless tube is a steel pipe that is perforated from a whole round steel and has no welds on the surface. Según el método de producción., seamless tubes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel tubes, extruded seamless steel tubes, and pipe jacking. Seamless steel pipes are mainly used as petroleum geological drilling pipes, cracking pipes for petrochemical industries, boiler pipes, bearing pipes and high-precision structural steel pipes for automobiles, tractors and aviation.
1. The chemical composition of steel generally refers to the verified smelting composition obtained by sampling and analysis after smelting, and the verified composition that can be sampled for verification and analysis after processing. Verification ingredients should be within the allowable deviation range specified in the corresponding standard.
2. The size of the steel pipe mainly refers to the wall thickness and diameter, and the diameter is divided into outer diameter and inner diameter, as well as the diameter deviation (ovalidad) of the same diameter. Relevant standards stipulate the allowable deviation of the diameter (outer diameter or inner diameter) and wall thickness of the steel pipe. The allowable deviation of the inch of the steel pipe of different precision grades is different. With the improvement of the precision grade, the allowable deviation is changed from large to small. The allowable deviation value of precision steel pipe is smaller than that of ordinary steel pipe, and the dimensional accuracy is high.
3. Improper appearance of seamless steel tube defects, including surface defects, end defects and shape defects. The surface defects include spots (water spots, rust spots, etc.), lineas de cabello (lineas de cabello, scribes), grietas (splits), cicatrices, warped skins (heavy skins), welding bumps, Se ha encontrado que durante la fractura frágil de baja tensión en materiales metálicos de alta resistencia, pliegues (rolled folds) , lineas de cabello (depresiones), pockmarks, roughness (roughness); end defects include slanting, burrs (burrs), etc.; shape defects mainly refer to bending in the direction of straightness, (represented by curvature or straightness). The permissible existence and extent of appearance defects vary in different standards. Generalmente hablando, the requirements for precision steel pipes are stricter.
4. The physical properties (mainly mechanical properties) of steel pipes have different regulations in different standards according to different steel grades, different delivery states and use requirements. Its specific physical properties are mainly three items: Fuerza de Tensión, yield strength and elongation after fracture.
5. The technological performance of the steel pipe refers to the adaptability of the steel pipe in the subsequent processing technology. Testing methods such as flattening, resplandeciente, doblando, and hydraulic pressure are mainly used to simulate the processing (or process (or application) state of the steel pipe in the subsequent process (or in use), and the sample is required to be intact after testing. Similarly, different steel grades, different There are different testing methods for delivery status and usage requirements.